Friday, 16 September 2011

Functions of Good Steering Parts

Steering parts of a vehicle consists of a collection of components, linkages, etc that allows a vehicle to follow the desired course. The main aim of a good steering system is to ensure that the wheels are pointing in the desired directions. Good steering parts should possess the quality of good agility to provide smooth running of the vehicle. The steering parts should have self straightening effect so that the steering wheel regains straight position when the driver releases the steering wheel after negotiating the turn. It should increase the turning effort applied by the driver on the steering wheel.

Listed below are some of the important functions of good steering parts of a vehicle.
  • Steering parts provide directional stability to a vehicle
  • It controls the wear and tear of tyres
  • It absorbs some part of the road shocks
  • Steering parts provide self straightening effect
  • It changes the rotary movement of steering wheel to angular turn of the front wheels
  • It increases the driver’s effort for turning the vehicle easily
If you want to know more about steering parts, steering and suspension, suspension parts and Roadsafe, please visit www.roadsafe.com.au

Monday, 29 August 2011

When does your car’s steering and suspension parts need replacement?

If your your car is not steering as it should or if your ride is tougher than usual, don’t blame it all on poor road conditions. These could be a signal of unknown defects in your car’s steering parts and suspension system.

The problem of the steering slipping while making turns or difficulty in holding the wheel in a turning position usually denotes a problem with the fluid levels in your steering system. You must check the fluid levels and add more power-steering fluid if required to enjoy smooth ride.

Your car’s steering may be pulled to one side due to poor wheel alignment, wearing out or sticking of brakes and of other steering parts and components. 

Likewise, if your car continues to bounce after hitting a bump, you must look into your car’s suspension needs. Such a problem is caused by broken and worn out shocks and struts and leaf springs. If you hear a clunking sound when hitting the bump, it might be the suspension noise that is produced by loose ball joints.

Since your ability to steer is directly linked to your car’ suspension system and steering parts, do get your car checked by a local auto care expert. Auto care experts check your steering and suspension system and parts thoroughly and provide valuable advice and services to ensure proper and safe functioning of your car’s steering and suspension parts.

To buy the best quality steering parts and suspension parts at economical rates, please visit www.roadsafe.com.au

Monday, 30 May 2011

What are the risks of having a loose or worn out tie rod in your vehicle?

A worn-out or loose tie rod end can prove to be dangerous for any vehicle. Normally, the steering wheel should not have more than a quarter inch of play and both the inner and the outer tie rod ends should have no detectable looseness. Loose tie rods result in steering looseness which leads to loss of steering control. Loose tie rods also result in a feathered wear pattern on the tyres and is probably the leading cause of rapid tyre wear.  

Therefore it is important to check your vehicle’s tie rods every now and then. Regular checking and timely replacement of the end tie rod can save you a fortune.

You can check whether the tie rod is loose or not by raising the front of the vehicle off the ground and shaking the front wheel back and forth. If you notice any free play, there is certainly something wrong with the tie rod end and you must get it replaced immediately.

Similarly, if you have driven your vehicle hundreds and thousands of kilometres, there are chances that your steering rack may be worn out and the best solution is to go for the replacement of the entire rack assembly. Another sign that your tie rod needs replacement is worn wheel bearings. Don’t ignore these signs and get the loose and worn out tie rod ends fixed as soon as possible.

To maximise the life of your tie rod, it is advisable to buy low fiction and high performance encapsulated tie rods. Such tie rods do not require greasing and servicing for the lifetime and do not get loose and worn out easily. To buy such tie rod, please log on to www.roadsafe.com.au 

Friday, 8 April 2011

Top reasons to buy steering & suspension products from Roadsafe

Those of you who are looking for ball joint, Tie rod, Idler, Panhard Rod, boot fitment, control arms, drag links, or any other steering and suspension components, it is advisable to buy them from Roadsafe.

Roadsafe is the leader in the suspension and steering components industry in Australia. It offers only the highest quality components that are made to pass through stringent quality checks and controls. Their products are guaranteed to last for years, offering you maximum value for money and unparalleled satisfaction.

At Roadsafe, you can choose from a wide range of steering and suspension components for all types of vehicles. It offers more than 2700 known vehicle applications, featuring over 3000 individual lines in both Roadsafe and O.E.M. Products ranges, plus an additional range of over 700 lines in ‘555’ Japanese brand. The steering and suspension line-up of Roadsafe is the most comprehensive in Australasia, with continued part number development as needs are identified.

In addition to great quality and extensive variety, you can enjoy superior customer service and after sales care at Roadsafe. Not to forget, the prices of ball joint, tie rod, idler, panhard rod, and other steering and suspension line-up are highly competitive. You just can’t find similar quality and prices elsewhere.

To know more about the company, their line of products, pricing, delivery, and more, please visit www.roadsafe.com.au .